HOME   CONTACT US   SITE MAP   KOREAN
 
 
ㆍAbout us
ㆍTesting
ㆍResearch
ㆍCertification
ㆍInvestigation&Standardization
ㆍTraining & Education
ㆍPublication
ㆍHow to find us
   
Home < Testing < Introduction
 
Introduction
FILK offers clients the widest range of fire tests in Korea for the fire protection, construction, marine and other industries. As a KOLAS accredited laboratory, we can comprehensively test, predict and assess the fire performance of products and materials to various

 
 
international test standards. Our fire tests may also form the basis of FILK Quality certification schemes or the requirements of other approval bodies, such as US Coast Guard, Lloyd's Register, BV, DNV, and other shipping registers.

 
Home < Testing < Classification
 
Classification
General testing : testing services to standards offered by clients through FILK quality system and test procedures



 
 
Regulatory testing : testing for clients to enable them to demonstrate compliance with relevent standards and regulations set by the national and international approval bodies.

 
Home < Testing < Test Products
 
Test Products
AREA PRODUCTS CONTACT
Fire Equipment Fire suppression Fire extinguisher, fire chemistry Convergence Safety System Research Team
T:+82 (31) 887 6651
bhan@kfpa.or.kr
jinmi@kfpa.or.kr
Fire protection system Sprinkler systems, Gaseous suppression systems
Reaction to fire
testing
Fire resistant Curtain, board, fabrics
Interior materials Interior materials for construction and marine industries
Fuel tank Plastic fuel tanks for vehicles
Relief valve Crankcase relief valve for shipping
Fire electricity Fire alarm Fire detection and alarm products pst7203@kfpa.or.kr

Electric fire

fire performance and functional integrity of cables
Fire resistance Structural members walls, beams, columns, floors, partitions, decks Fire Resistance Lab
T:+82 (31) 887 6681
dhchoi@kfpa.or.kr
Sealings penetration sealing systems
Fire protection system fire doors, dampers, shutters
Construction materials concretes Construction Materials &
Environment Lab
T:+82 (31) 887 6691
jgjeong@kfpa.or.kr
Construction enviroment heat penetration, sound insulations

 
Home < Testing < Shipping Materials
 
Shipping Materials
FILK tests in accordance with IMO FTP Codes form the basis of the requirements of shipping approval bodies such as LR, BV, DNV, RMRS, etc.
AREA (FTP CODE) Test Method CONTACT Team
leader
e-mail Tel
Part1 : Non-combustibility test
Part2 : Smoke & toxicity test
Part5 : Test for surface flammability
Part 6 : Test for primary deck coverings
ISO 1182:1990
As describe part2
Res.A.653(16)
Res.A.653(17)
Convergence Safety System Research Team K.O, Kim jinmi
@kfpa.or.kr
+82 (31) 887 6651
?? if you want more information about Part 2 : Smoke & toxicity test click here  ,
Part 5 : Test for surface flammability, Part 6 : Test for primary deck coverings click here
Part3 : Test for "A","B" & "F" class division
Part4 : Test for fire control systems
Res. A.754(18)
As described
in part4
Fire Protection & Resistance Lab D.H, Choi dhchoi@
kfpa.or.kr
+82 (31) 887 6681

 
Home < Testing < USCG Type Approval Testing Service
 
USCG Type Approval Testing Service
FILK was accepted by USCG to conduct fire testing in accordance with IMO FTP Code Part 1, 3, 4, 5 and 6 for its Type-Approval Certification in August 2002, the first among the fire laboratories in Asia and one of the 15 laboratories worldwide approved by USCG. As a USCG accepted fire laboratory FILK, on behalf of USCG, conducts rigorous assessments and testing of the ship's articles such as insulations, fire doors, bulkhead panels, ceilings, deck assemblies, interior finishes, etc., and helps ensure, through FILK Follow-Up service, the quality system of the manufacturers that are certified by USCG.
IMO shipping materials test
(FTP CODE)
Test Method CONTACT Team
leader
e-mail Tel
Part1 : Non-combustibility test
Part2 : Smoke & toxicity test
Part5 : Test for surface flammability
Part6 : Test for primary deck coverings
ISO 1182:1990 As described in part2 Res. A.653(16) Res. A.653(17) K.O, Kim jinmi
@kfpa.or.kr
+82 (31) 887 6651
Part3 : Test for "A","B" & "F" class division Part4 : Test for fire control systems Res. A.754(18) As described in part4 Fire Resistance
Lab
D.H, Choi dhchoi@
kfpa.or.kr
+82 (31) 887 6681

 
Home < Testing < Fire resistant test of the plastic fuel tank for vehicles
 
TUV CERTIFICATION TEST(Fire resistant test of the plastic fuel tank for vehicles)
Fire resistant test of the plastic fuel tank for vehicles is to assess the fire resistance performance and air tightness of the fuel tank by heating the tank specimen directly and indirectly with gasoline for 2 minutes. Test equipment consists of fuel pan, screen, chassis transport, rail, and control panel

Fire Test Standards  
- EEC Directive 70/221/EEC(Annex I/6.3.5)
- ECE Regulation 34(Annex 5/5)

 

Test Equipment  
ITEM USE SPECIFICATIONS
Fuel pan Direct flaming
1,600(L)×1,200(W), Steel
Screen Indirect flaming 2,300(L)×1,600(W), Blucks
Chassis
Moving device
Moving chassis
2,600(L)×2,300(W), Steel
Rail Moving screen & fuel tank 10m, Steel
Wireless control,
Cabinet type
Controlling the equipment  
Test Protucts Reaction to fire testing click here

contact
e-mail : junesuklee@kfpa.or.kr
tel : +82 (31) 887 6655
 
Home < Testing < Crankcase relief valve performance test
 
Crankcase relief valve performance test
Assess the performance of crankcase explosion relief valves intended to be fitted into engines and gear cases to the requirements by shipping approval bodies.

Fire Test Standards  
- IACS UR M66. rev.3
 

Test Equipment  
ITEM USE SPECIFICATIONS
Test Vessel For Relief Valve Installation & Explosion
0.8 1.6 6 10 Steel
FTIR (9.5 ± 0.5)% Density Measurement of Gas MIDAC CORPORATION FTIR-14001
Pressure Equipment Explosion Pressure Measurement
Dyno Ware Type KISTLER 2825A-02-2
Therm Cam Measurement of Flame Discharge CEDIP SC 5000
Control system Collection of Data Cabinet type

 
Home < Testing < Test Procedures
 
Test Procedures
Test procedures are as following, and products to be tested and fees should be sent to us before testing.

You can pay test fees through bank accounts or credit cards.
Contact with the relevant testing lab about the details such as fees and schedules you need.
* Korean Won(is standard currency in Korea, but as a foreigner you can pay it with US $, and Payment should be completed within 7 days from the day you got an estimate)
 
 
   
 
1030, GYEONGCHUNG-DAERO, GANAM-EUP, YEOJU-SI, GYEONGGI-DO, 469-881, REPUBLIC OF KOREA TEL +82 (31) 887 6600